MAC-REWRITE Error: None, Loopback: Enabled, Source filtering: Disabled,įlow control: Enabled, Auto-negotiation: Enabled, Remote fault: Onlineĭevice flags : Present Running Loop-Detected Link-level type: Ethernet, MTU: 1514, Speed: 1000mbps, BPDU Error: None, Sample Output show interfaces ge-4/0/6 extensive Physical interface: ge-4/0/6, Enabled, Physical link is Up Interface index: 144, SNMP ifIndex: 516, Generation: 147 Interface (CLI) operational mode command: show interfaces ( fe- fpc/ port | ge- fpc/ pic/ port) To verify that the status of the Fast Ethernet or GigabitĮthernet interface is up, use the following Junos OS command-line
| gigether-options] hierarchy level, places the interface into Interfaces interface-name (fastether-options Simply including the loopback statement at the [edit There is no option to use a local or remote statement. On anĮthernet interface, you cannot create a remote loopback, therefore Of the PIC but does not test the transmit and receive ports. A local loopback tests the interconnection When you create a local loopback, you create an internal loop In configuration mode, go to the following hierarchy level: edit interfaces interface-name (fastether-options | gigether-options)Ĭonfigure the local loopback: [edit interfaces interface-name (fastether-options | set loopbackįor example: [edit interfaces fe-1/0/0 showįor example: [edit interfaces fe-1/0/0 commit The transmit port to the receive port, follow these steps: To configure a local loopback without physically connecting Perform Steps 2 through 8 from Diagnose a Suspected Hardware Problem with a Fast Show interfaces (fe- fpc/pic/port | ge- fpc/pic/port ) extensive Interface (fe- fpc/pic/port | ge- fpc/pic/port count 100 rapidĬheck for Fast Ethernet or Gigabit Ethernet Interface
Ping the Fast Ethernet or Gigabit Ethernet Interface Interface-name unit logical-unit-number family inet addressĬlear Fast Ethernet or Gigabit Ethernet InterfaceĬlear interfaces statistics fe- fpc/pic/port | ge- fpc/pic/port Show interfaces ge- fpc/pic/port [edit interfaces Show interfaces (fe- fpc/pic/port | ge- fpc/pic/port)Ĭonfigure a Static Address Resolution Protocol Table Verify That the Fast Ethernet or Gigabit Ethernet Interface-name (fastether-options | gigether-options)] For Using Loopback Testing for Fast Ethernet and Gigabit Ethernetĭiagnose a Suspected Hardware Problem with a FastĬreate a Physical Loopback for a Fiber-Optic InterfaceĬonnect the transmit port to the receive port.Ĭreate a Loopback Plug for an RJ-45 Ethernet InterfaceĬross pin 1 (TX+) and pin 3 (RX+) together, and pin 2
0 kommentar(er)
